Titan 15" 700w RMS Passive Speaker Black

Wharfedale Titan - 15 Active Speaker Black

Our unique EWG design is the result of intensive computer modeling of natural acoustic wave propagation. To provide more acoustically transparent high-frequency pattern control, hard edges, corners, and parallel surfaces were eliminated from the design while still enabling 90 x 60 degree high frequency coverage. The smoother, more "organic" shape of the EWG design reduces high frequency distortion and diffraction eliminating acoustic artifacts found in other horn design technologies. The result is smoother frequency response, greater driver efficiency, and improved vocal and instrument reproduction.

Proprietary 90° x 60° Elliptical Wave Guide horn design
Power on indicator in horn throat and on rear panel

Titan15 ACTIVE DESCRIPTIONS

Amplifier:

The Titan 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.

The bottom of the Titan 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.

The speaker stand receptacle features a locking screw to ensure stability.

Ten M8 threaded rigging points are provided for a variety of safe flying

configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.

Mixer and Controls

The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.

Features 

• 2-way, active bi-amplified speaker system
• Custom 15", Low Frequency driver and Titanium High Frequency compression driver provide exceptional • clarity, high power handling capability and maximum efficiency
• State-of-the-art, high efficiency switch mode power supply with a class D low frequency power amplifier and a class A/B or class D high frequency amplifier
• Low frequency power (Class D) 350W RMS, 700W PEAK
• High frequency power (Class A/B) 70W RMS, 140W PEAK
• Active signal limiting system with LED indicator on rear panel
• Built in 2 channel mixer with microphone and line level inputs Balanced XLR line output for connections to subwoofers or daisy chaining units together
• Switchable Bass Response Optimizer (BRO™) circuit
• Low distortion, high power handling, water resistant woofer
• Professional high frequency compression driver with titanium diaphragm
• XLR and TRS line inputs via convenient 'combo' jacks
• Two band master EQ controls
• Full Protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters

SPECIFICATIONS

MODEL : TITAN 15 ACTIVE

GENERAL INFO :

•  SYSTEM TYPE Active 15" 2-way Bi-Amplified
•  FREQUENCY RESPONSE +/- 3DB 50-20kHz
•  MAX SPL (CALC) 125dB

HF SECTION :

•  HF TYPE Titanium Compression Driver
•  HORN DISPERSION (H X V) 90° x 60°
•  HF EXIT SIZE MM / INCHES 25mm / 1"

PHYSICAL FEATURES :

•  ENCLOSURE MATERIAL Injection Moulded Polypropylene
•  ENCLOSURE COLOUR Grey or White or Black
•  SIZE (MM/INCHES) 381mm / 15"

IN / OUT PANEL (SPEAKER LEVEL) : INPUT CONNECTOR XLR - 1/ 4" Combo jack

AMPLIFIER POWER :

•  POWER ON PROTECTION Power switch on / off mute
•  THERMAL PROTECTION Amplifier shutdown, auto reset
•  LOW LINE VOLTAGE SHUT DOWN 60% Nominal line voltage
•  DRIVER PROTECTION Independent LF and HF limiters
•  DC PROTECTION Yes
•  SHORT PROTECTION Yes

CONTROLS : High (±10dB) 10kHz Shelving

DIMENSIONS (HXWXD) :

•  MM 708.3mm x 477.8mm x 401.77mm
•  INCHES 27.9" x 18.8" x 15.8"

MICROPHONE / TRANSMITTER : MAXIMUM INPUT LEVEL +22dBu

IMPEDANCE : 4 Ω

MIXER MODEL 

INPUT IMPEDANCE : Balanced: 20k ohms Unbalanced: 10k ohms

CLIP LIMITER : Turns on approx 350W output

LIMITER INDICATOR Red LED
POWER INDICATOR Red LED

AC POWER DETAILS :

•  POWER SUPPLY High Efficiency Switching Mode Power Supply
•  AC POWER OPTIONS AC100~120V / 220~240V, 50 / 60Hz
•  POWER ON INDICATOR LED
•  RIGGING / BRACKET / 10 M8 threaded inserts including 4
•  MOUNTING OPTIONS M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket

IMPEDANCE BALANCED : Balanced: 1k ohm - Unbalanced: 500 ohm

LINE OUTPUT : LINE OUTPUT CONNECTOR Switchable LOOP / MIX Balanced Male XLR

INPUT A - TYPE : Switchable balanced mic or line level input

INPUT SENSITIVITY Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms)
MAXIMUM INPUT LEVEL +22dBu
INPUT CONNECTOR XLR - 1/ 4" Combo jack
INPUT IMPEDANCE Balanced: 20k ohms Unbalanced: 10k ohms

INPUT B - TYPE : Line level input

INPUT SENSITIVITY XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms)
MAXIMUM INPUT LEVEL +22dBu
INPUT CONNECTORS Combo jack: 1/4" - XLR / Summed dual RCA jacks

BASS RESPONSE OPTIMIZER :

•  ("BRO"™) CIRCUIT +5dB at 60Hz
•  SUBSONIC FILTER 30Hz, Second-order filter

AMPLIFIERS :

•  LOW-FREQUENCY (CLASS D) Rated 350W RMS, 700W Peak
•  HIGH- FREQUENCY (CLASS D) Rated 70W RMS, 140W Peak

ELECTRONIC CROSSOVER : 24dB/octave Linkwitz-Riley

•  CROSSOVER FREQUENCY 1.8kHz

CONTROLS : High (±10dB) 10kHz Shelving

EQUALIZATION : Low (±10dB) 100Hz Shelving

DIMENSIONS & WEIGHT :

•  NET WEIGHT ( KG / LBS ) 23.7kg / 52.67lbs
•  GROSS WEIGHT ( KG / LBS ) 26.94kg / 59.27lbs