TC Electronic Hall of Fame 2 Mini Reverb

Fit multiple halls of reverb onto a tiny portion of your pedalboard with the TC Electronic Hall of Fame 2 Mini Reverb Pedal, a stompbox designed for electric guitars. The pedal offers four controls: Decay, Tone, Level, and reverb Type selector. You'll find eight built-in reverb tones, including a new Shimmer algorithm for gorgeous, otherworldly tones. Three tone slots for your custom TonePrints round out the pedal.

Indeed, use the TonePrint Editor to gain full control over effect behaviour and type. Create your own reverb sounds with their own controls, and then use the TonePrint App to beam your custom setting to the pedal with an Android or iOS device.

This pedal sports a MASH footswitch for expression-style effects, attainable by pressing down on the footswitch with varying degrees of pressure. Two 6.5mm inputs and two 6.5mm outputs are on hand to facilitate both mono and stereo connections. Analogue-dry-through circuitry is employed, ensuring the original signal is unprocessed as it passes through the pedal. You can select between true-bypass and buffered-bypass circuits, which have different effects on the overall tone of your signal.

A power supply is available separately. You can also power the pedal with a 9V battery.

Key Features:

• MASH technology turns footswitch into a pressure-responsive expression controller.
• New shimmer reverb algorithm pitches your reverb up an octave through each feedback loop to give an otherworldly sound.
• TonePrint enabled to let you beam signature tones into your pedal with the free TonePrint App.
• 3 dedicated TonePrint slots for storing signature effects.
• Design your own customised reverb effects from scratch with free TonePrint Editor for PC, Mac, and iPad.
• Simple, easy-to-use controls let you focus on playing.
• True bypass allows for optimum clarity and zero high-end loss when the pedal is off.
• Works with guitar and FX-loop signals.
• Optional buffered bypass mode prevents high frequency loss from long cable runs.
• Analogue-Dry-Through maintains total integrity of analogue dry signal path even when reverb is engaged.

Specifications

Input	1 x 1/4" TS, Phone Type
Output	1 x 1/4" TS, Phone Type
Other Connectors	1 x Mini-USB Type-B
Impedance	Input: 1 MOhm Output: 100 Ohms
Controls	Reverb Knob Bypass/Engage Footswitch
Circuitry	Signal: Analogue Dry-Through
Bypass	True Bypass
Power Requirements	Standard 9 VDC, Centre Negative >100 mA (Power Supply Available Separately)
Dimensions (WxDxH)	1.9 x 1.9 x 3.7" / 48 x 48 x 93 mm